Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1991TAURUS L, 4D SEDAN, 3.8 4REPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATER SYSTEMSERVICING PRECAUTIONSAIR BAG DEACTIVATION DISABLING SYSTEM
1991 Ford Taurus L, 4D Sedan, 3.8 4
Air Bag Deactivation Disabling System
1991 Ford Taurus L, 4D Sedan, 3.8 4SECTION Air Bag Deactivation Disabling System
- Disconnect negative battery cable. Open glove box past stops (press in sides). Disconnect back-up power supply connector (Blue box, one connector).
- Remove 4 nuts and washers retaining air bag module to steering wheel. Disconnect air bag module connector. Attach jumper wire between air bag terminals (Gray/Orange and Gray/White wires) on clockspring. Connect back-up power supply and negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.