Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Function Select Modes Operation: Vent
When VENT is selected, outside air is allowed into system. No vacuum is applied to the outside/recirculation vacuum motor. No vacuum is applied to floor/panel vacuum motor. Recirculation air is shut off by the outside/recirculation mode door. Airflow is routed to panel outlets. Air temperature can be adjusted to desired setting. Blower motor is on and can be adjusted to desired speed.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.