Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1991TAURUS L, 4D SEDAN, 3.8 4REPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONS
1991 Ford Taurus L, 4D Sedan, 3.8 4
Alignment Specifications
1991 Ford Taurus L, 4D Sedan, 3.8 4SECTION Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS (SABLE - SEDAN)
| Application | Fraction | Decimal | |||
|---|---|---|---|---|---|
| Camber (Degrees) | |||||
| Front | -1/2 +/- 17/32 | (-.50 +/- .53) | |||
| Rear | -7/8 +/- 11/16 | (-.87 +/- .68) | |||
| Caster (Degrees) (1) | 3 11/16 +/- 1 | (3.68 +/- 1.0) | |||
|
|||||
WHEEL ALIGNMENT SPECIFICATIONS (SABLE & TAURUS - WAGON)
| Application | Fraction | Decimal | |||
|---|---|---|---|---|---|
| Camber (Degrees) | |||||
| Front | -7/16 +/- 9/16 | (43 +/- .56) | |||
| Rear | -7/8 +/- 1 | (.87 +/- 1.0) | |||
| Caster (Degrees) (1) | 3 5/8 +/- 1 | (3.62 +/- 1.0) | |||
| Toe-in (Inches) | |||||
| Front | -3/32 +/- 1/8 | (-.10 +/- .13) | |||
| Rear | 1/16 +/- 1/8 | (.06 +/- .13) | |||
| Toe-in (Degrees) | |||||
| Front | -3/16 +/- 1/4 | (-.18 +/- .25) | |||
| Rear | 1/8 +/- 1/4 | (.13 +/- .25) | |||
|
|||||
WHEEL ALIGNMENT SPECIFICATIONS (TAURUS - SEDAN)
| Application | Fraction | Decimal | |||
|---|---|---|---|---|---|
| Camber (Degrees) | |||||
| Front | -1/2 +/- 17/32 | (-.50 +/- .53) | |||
| Rear | -15/16 +/- 11/16 | (-.93 +/- .68) | |||
| Caster (Degrees) (1) | 3 13/16 +/- 1 | (3.81 +/- 1.0) | |||
| Toe-in (Inches) | |||||
| Front | -3/32 +/- 1/8 | (-.10 +/- .13) | |||
| Rear | 1/16 +/- 1/8 | (.06 +/- .13) | |||
| Toe-in (Degrees) | |||||
| Front | -3/16 +/- 1/4 | (-.18 +/- .25) | |||
| Rear | 1/8 +/- 1/4 | (.13 +/- .25) | |||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.