Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSFORD1991CLUB WAGON E350, 7.5 GREPAIR AND DIAGNOSISENGINE PERFORMANCESENSOR RANGE CHARTSENGINE CONTROLS - SENSOR OPERATING RANGE CHARTSMANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
1991 Ford Club Wagon E350, 7.5 G
Manifold Absolute Pressure (Map) Sensor
1991 Ford Club Wagon E350, 7.5 GSECTION Manifold Absolute Pressure (Map) Sensor
MAP SENSOR SPECIFICATIONS
| Manifold Vacuum (In. Hg) | (1) Frequency (Hz) | ||
|---|---|---|---|
| 0 | 159 | ||
| 3 | 150 | ||
| 6 | 141 | ||
| 9 | 133 | ||
| 12 | 125 | ||
| 15 | 117 | ||
| 18 | 109 | ||
| 21 | 102 | ||
| 24 | 95 | ||
| 27 | 88 | ||
| 30 | 80 | ||
|
|||
MAP SENSOR VOLTAGE OUTPUT
| Elevation (Feet) | Volts |
|---|---|
| 0 | 1.55-1.63 |
| 1000 | 1.52-1.60 |
| 2000 | 1.49-1.57 |
| 3000 | 1.46-1.54 |
| 4000 | 1.43-1.51 |
| 5000 | 1.40-1.48 |
| 6000 | 1.37-1.45 |
| 7000 | 1.35-1.43 |
MAP/BP SENSOR SPECIFICATIONS
| Barometric Pressure (In. Hg) | (1) Frequency (Hz) | ||
|---|---|---|---|
| 17.1 | 122.4 | ||
| 18.3 | 125.5 | ||
| 19.5 | 128.7 | ||
| 20.7 | 131.9 | ||
| 21.8 | 135.1 | ||
| 23.0 | 138.3 | ||
| 24.2 | 141.8 | ||
| 25.4 | 145.4 | ||
| 26.6 | 148.9 | ||
| 27.7 | 152.5 | ||
| 28.9 | 156.1 | ||
| 30.1 | 159.6 | ||
| 31.0 | 162.4 | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.