Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1990RANGER 4WD L4-140 2.3L SOHCREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESWIPERS DO NOT RUN WHEN WASHER SWITCH IS PULLED
1990 Ford Ranger 4WD L4-140 2.3L SOHC
Wipers Do Not Run When Washer Switch Is Pulled
1990 Ford Ranger 4WD L4-140 2.3L SOHCSECTION Wipers Do Not Run When Washer Switch Is Pulled
1. If wiper operation is satisfactory on INT, Low and Hi replace governor.
2. If wiper operation is not satisfactory in all 3 modes, switch or governor is defective.
2. If wiper operation is not satisfactory in all 3 modes, switch or governor is defective.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.