EEC IV - Revised Pinpoint Test Steps

1990 Ford Ranger 4WD L4-140 2.3L SOHCSECTION EEC IV - Revised Pinpoint Test Steps
89ford36

ROTUNDA EQUIPMENT - "TFI/EEC-IV INTERMITTENT IGNITION ANALYZER" INSTRUCTION BOOK - "PINPOINT TEST" FLOW CHART CORRECTION
Article No. 89-25-10
FORD: 1987-90 CROWN VICTORIA, ESCORT, MUSTANG, TAURUS, TEMPO

LINCOLN-MERCURY: 1987-90 CONTINENTAL, GRAND MARQUIS, MARK VII, SABLE, TOPAZ, TOWN CAR

LIGHT TRUCK: 1987-90 AEROSTAR, BRONCO II, BRONCO, ECONOLINE, F-150, F-250, F-350, RANGER 1988-90 F SUPER DUTY

Figure 1:




ISSUE: The "Pinpoint Test" flow chart on page 8 in the instruction book is incorrect. The instruction book (Rotunda # 2490-786) comes with the "TFI/EEC-IV Intermittent Ignition Analyzer" Model HK453 (Rotunda Equipment # 007-00035).

ACTION: Use the revised "Pinpoint Test" steps shown in Figure 1. This information should be inserted in the instruction book, page 8, for future use.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 680000
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.