Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1988LTD WAGON V8-302 5.0LREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONS
1988 Ford LTD Wagon V8-302 5.0L
Alignment: Specifications
1988 Ford LTD Wagon V8-302 5.0LSECTION Specifications
| Caster Angle | +3 1/4 to +5 Degrees (deg) | |
| Caster Angle Desired | 4 Degrees (deg) | |
| Camber Angle | Left | - 1/4 to +1 1/4 Degrees (deg) |
| Right | - 1/4 to +1 1/4 Degrees (deg) | |
| Camber Angle Desired | Left | 0.5 Degrees (deg) |
| Right | 0.5 Degrees (deg) | |
| Toe-In | 1/16 Inch (in) | |
| Toe-Out on Turns Note: Incorrect toe-out when other adjustments are correct, indicates bent steering arms. | Outer Wheel | --- |
| Inner Wheel | --- |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.