Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1988 Ford Escort Pony, Standard, MTXIII
Quick Lookups: Fluids
1988 Ford Escort Pony, Standard, MTXIIISECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.13 LBS. | 0.96 KG | R-12 | S | |||
| Automatic Transmission Fluid | 8.30 QTS. | 7.85 L | Automatic Transmission Fluid DEXRON II | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill at master cylinder to 1/4" from top. | S | ||
| Engine Coolant | Standard Trans | w/Air Cond | 6.80 QTS. | 6.43 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S |
| Engine Coolant | Standard Trans | w/o Air Cond | 8.30 QTS. | 7.85 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S |
| Engine Oil | w/Filter | 4.00 QTS. | 3.78 L | SAE 5W-30 (Preferred) (Below -20Deg.F to 60Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | S | ||
| Engine Oil | w/o Filter | 3.50 QTS. | 3.31 L | SAE 5W-30 (Preferred) (Below -20Deg.F to 60Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | S | ||
| Fuel Tank | 13.00 GALS. | 49.21 L | S | ||||
| Manual Transmission Fluid | 5 Spd Trans | 6.20 PTS. | 2.93 L | MOTORCRAFT Type F or Automatic Transmission Fluid DEXRON II | S | ||
| Power Steering Fluid | 1.60 PTS. | 0.75 L | Automatic Transmission Fluid DEXRON II or Power Steering Fluid | S | |||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.