SYS.OK|MANUAL.DB● LIVE
1988 Ford Econoline E150, Van Display, 5.0 N

Quick Lookups: Fluids

1988 Ford Econoline E150, Van Display, 5.0 NSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant Front & Rear 4.25 LBS. 1.92 KG R-12 Add 4 oz. if temperature is below zero. S
Air Cond Refrigerant Front 3.50 LBS. 1.58 KG R-12 Add 4 oz. if temperature is below zero. S
Automatic Transmission Fluid 5.0L Eng 12.30 QTS. 11.64 L Automatic Transmission Fluid DEXRON II S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill at master cylinder to 1/4" from top. S
Differential Gear Oil w/Casting Mounted Fill Plug 5.50 PTS. 2.6 L Multi-Purpose Long Life Gear Oil S
Differential Gear Oil w/Rear Cover Mounted Fill Plug 6.50 PTS. 3.07 L Multi-Purpose Long Life Gear Oil S
Engine Coolant 5.0L Eng w/Air Cond 18.50 QTS. 17.5 L 50/50 mixture of FORD Premium Cooling System Fluid and water Specification: ESE M97B44 A. H
Engine Coolant 5.0L Eng w/o Air Cond 17.50 QTS. 16.56 L 50/50 mixture of FORD Premium Cooling System Fluid and water Specification: ESE M97B44 A. H
Engine Oil Gas w/Filter 6.00 QTS. 5.67 L SAE 5W-30 Super Premium (Below 0Deg.F), 10W-30 Premium (Preferred) (0Deg.F to Above 100Deg.F) S
Engine Oil Gas w/o Filter 5.00 QTS. 4.73 L SAE 5W-30 Super Premium (Below 0Deg.F), 10W-30 Premium (Preferred) (0Deg.F to Above 100Deg.F) S
Fuel Tank 124 IN. WB 16.00 GALS. 60.56 L S
Fuel Tank 138 IN. WB 22.00 GALS. 83.27 L S
Manual Transmission Fluid 3.40 QTS. 3.21 L Automatic Transmission Fluid MERCON S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II S
Windshield Washer Fluid N/A N/A Ultra-Clear Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.