Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1987TEMPO AWD L4-140 2.3L HSCREPAIR AND DIAGNOSISMAINTENANCESERVICE AND REPAIRLOW OIL LEVEL WARNING INDICATOR
1987 Ford Tempo AWD L4-140 2.3L HSC
Low Oil Level Warning Indicator
1987 Ford Tempo AWD L4-140 2.3L HSCSECTION Low Oil Level Warning Indicator
This system is used to indicate when engine oil level is 1 1/2 quarts or more below the specified level. The lamp will be illuminated during engine starting. If oil level is sufficient, the lamp will go off when engine is operating. If oil level is low the lamp will remain on until engine oil is added and the ignition switch is placed in the Off position. The module will take approximately 5 minutes to reset. If the engine is started during this period, the last recorded reading will be displayed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.