Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Combination Air By-Pass/Air Control Valve
Combination air by-pass/air control valve is used with some managed air thermactor systems. Valve combines functions of two normally closed valves in one unit. There are bleed type and non-bleed type valves; both look alike. Bleed type valves will have percentage of bleed molded into side of case. By-Pass portion of valve dumps air to atmosphere, while control valve portion directs air upstream or downstream.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.