Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1985E 150 VAN L6-300 4.9LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSALIGNMENTCASTER
1985 Ford E 150 Van L6-300 4.9L
Caster
1985 Ford E 150 Van L6-300 4.9LSECTION Caster
| Caster Note: Side to side caster readings must be wintin 1 1/2 (degrees), when vehicle riding height is within 1/8 inch side to side. | ||
| Ride Height | 3.8 in | +7 1/2 to +9 1/2 Degrees (deg) |
| 4.05 in | +7 to +9 Degrees (deg) | |
| 4.3 in | +6 1/4 to +8 1/4 Degrees (deg) | |
| 4.55 in | +5 1/2 to +7 1/2 Degrees (deg) | |
| 4.8 in | +5 to +7 Degrees (deg) | |
| 5.05 in | +4 1/2 to +6 1/2 Degrees (deg) | |
| 5.3 in | +3/4 to +5 3/4 Degrees (deg) | |
| 5.55 in | +3 3/4 to +5 3/4 Degrees (deg) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.