Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1985BRONCO 5.8 G, STANDARD, TODREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 45 (EEC IV THEORY/OPERATION)DESCRIPTIONMANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
1985 Ford Bronco 5.8 G, Standard, TOD
Manifold Absolute Pressure (Map) Sensor
1985 Ford Bronco 5.8 G, Standard, TODSECTION Manifold Absolute Pressure (Map) Sensor
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1988 Ford Ranger, 1988 Ford RV Cutaway, 1988 Ford Pickup, 1988 Ford F-Super Duty, and 1988 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
MAP sensor measures absolute pressure of mixture in intake manifold and sends a proportional signal to the ECA.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.