Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1985BRONCO 5.8 G, STANDARD, NP435REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 7 (SERVICING - M/T)LUBRICATIONFLUID CAPACITY
1985 Ford Bronco 5.8 G, Standard, NP435
Fluid Capacity
1985 Ford Bronco 5.8 G, Standard, NP435SECTION Fluid Capacity
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1986 Ford Ranger, 1986 Ford RV Cutaway, 1986 Ford Pickup, 1986 Ford Econoline, and 1986 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION REFILL CAPACITY (AEROSTAR)
| Application | Quantity |
|---|---|
| Aerostar (Mazda 5-Speed) | 4.0 pts. (1.7L) |
TRANSMISSION REFILL CAPACITY (BRONCO, "F" PICKUPS, "E" VANS)
| Application | Quantity | |
|---|---|---|
| Ford 3.03 3-Speed | 3.5 pts. (1.6L) | |
| Warner T-18 4-Speed | 7.0 pts. (3.3L) | |
| Warner T-19B 4-Speed | 7.0 pts. (3.3L) | |
| New Process 435 4-Speed | ||
| With Extension | 7.0 pts. (3.3L) | |
| Without Extension | 6.5 pts. (3.3L) | |
| Ford TOD 4-Speed Overdrive | 4.5 pts. (2.1L) | |
| Ford 4-Speed Overdrive | 4.5 pts. (2.1L) | |
TRANSMISSION REFILL CAPACITY (BRONCO II & RANGER)
| Application | Quantity |
|---|---|
| Mazda 5-Speed (2WD) or (4WD) | 4.0 pts. (1.7L) |
| Mitsubishi 5-Speed (4WD) | 3.0 pts. (1.4L) |
NOTE:
Capacities given are approximate. Correct fluid level should be determined by level at filler plug hole, rather than amount added.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.