Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1985BRONCO 5.8 G, STANDARD, NP435REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMFUEL INJECTION SYSTEM - MULTI-POINTTORQUE SPECIFICATIONS
1985 Ford Bronco 5.8 G, Standard, NP435
Torque Specifications
1985 Ford Bronco 5.8 G, Standard, NP435SECTION Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| ACT Sensor | 12-18 (16-24) | |
| Upper Intake Manifold Bolts | ||
| 2.3L | 15-22.5 (20-30) | |
| 5.0L | 12-18 (17-24) | |
| Coolant Temperature Sensor | 23-33 (31-45) | |
| Fuel Supply Manifold Bolts | 15-22 (20-30) | |
| Lower Intake Manifold Bolts | ||
| 2.3L | 12-15 (16-20) | |
| 5.0L | 23-25 (32-33) | |
| EGR Tube-To-EGR Valve | 6-8.5 (8-11.5) | |
| Throttle Body Retaining Bolts | 12-25 (16-20) | |
| Pressure Relief Valve | 4-7 (6.0-9.0) | |
| INCH Lbs. (N.m) | ||
| Pressure Regulator Screws | 26-40 (3.0-4.0) | |
| Throttle Position Sensor | 14-16 (1.6-1.8) | |
| Pressure Relief Valve Cap | 4-6 (.5-.7) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.