Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD1984ECONOLINE E150, VAN WINDOW EXTENDED, 5.8 HREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETUNE-UPDISTRIBUTOR APPLICATION & SPECIFICATIONSSPECIFICATIONSDISTRIBUTOR ADVANCE SPECIFICATIONS

1984 Ford Econoline E150, Van Window Extended, 5.8 H

Distributor Advance Specifications

1984 Ford Econoline E150, Van Window Extended, 5.8 HSECTION Distributor Advance Specifications

DISTRIBUTOR ADVANCE SPECIFICATIONS ⁽¹⁾

Part No. (12127-)

Initial Timing ° BTDC

Hose Disconnected ⁽²⁾ ° BTDC

Hose Connected ⁽²⁾ ° BTDC

E27E-BA ⁽³⁾

18-23

39-51

E37E-GA

15-20

34-46

E27E-AA ⁽⁴⁾

34-45

13-18

E37E-FA

16-21

33-45

E3TE-ZA ⁽⁵⁾

15-20

32-43

E3TE-AAA

16-21

34-44

E43E-JA

15-19

34-46

E43E-HA ⁽⁶⁾

15-19

34-46

E3HE-BA

23-27

39-49.5

E4HE-AA ⁽⁷⁾

18-23

26-34

⁽¹⁾	For Distributor RPM & Degrees, Divide Specifications By 2.

⁽²⁾	Total advance @ 2500 engine RPM.

⁽³⁾	Calibration number 3-49T-R20 is 6 initial timing, 13-18 disconnected, 34-45 connected. Calibration number 3-49S-R17 is 6 initial timing, 16-21 disconnected, and 37-48 connected.

⁽⁴⁾	Calibration numbers 3-49Y-R20, 3-50Y-R18, 3-49Y-R21 are 10 initial timing, 17-22 disconnected, 38-49 connected. Calibration numbers 3-49T-R21 & 3-49T-R21 are 6 initial timing, 13-18 disconnected, 34-45 connected.

⁽⁵⁾	Calibration numbers 4-53Z-R10 & 4-53Z-R11 are 12 initial timing, 19-24 disconnected, 36-47 connected.

⁽⁶⁾	Calibration numbers 4-54W-R10 & 4-54W-R11 are 12 initial timing, 19-23 disconnected, 38-50 connected.

⁽⁷⁾	Calibration number 3-98S-R10 is 8 initial timing, 23-27 disconnected, 39-49.5 connected.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.