Pump Seasonal Setting

1965 Ford Falcon Base, 2.8L Eng, Standard Trans, Trans Mfr CD 2.77SECTION Pump Seasonal Setting

For operating temperatures below 50Β°F, install roll pin in "HI" (lower) hole of pump lever. For temperatures above 50Β°F, or altitudes above 5000 ft., install roll pin in "LO" (upper) hole of pump lever.

Fig 1: ACCELERATING PUMP SEASONAL SETTING
G09353004Courtesy of FORD MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.