Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1997VISION V6-201 3.3L VIN T SFIREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COMPONENTSSYSTEM SPECIFICATIONS
1997 Eagle Vision V6-201 3.3L VIN T SFI
System Specifications
1997 Eagle Vision V6-201 3.3L VIN T SFISECTION System Specifications
Camshaft Sprocket
Torque 40 Ft/lbs.
Crankshaft Harmonic Balancer Pulley Bolt
Torque 40 Ft/lbs.
Valve Timing Exhaust Valve
Closes (ATC) 12°
Opens (BBC) 48°
Duration 240°
Valve Timing Intake Valve
Closes (BTDC) 58°
Opens 2°
Duration 240°
Valve Overlap 14°
Torque 40 Ft/lbs.
Crankshaft Harmonic Balancer Pulley Bolt
Torque 40 Ft/lbs.
Valve Timing Exhaust Valve
Closes (ATC) 12°
Opens (BBC) 48°
Duration 240°
Valve Timing Intake Valve
Closes (BTDC) 58°
Opens 2°
Duration 240°
Valve Overlap 14°
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.