Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1997VISION V6-201 3.3L VIN T SFIREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BLOCK
1997 Eagle Vision V6-201 3.3L VIN T SFI
Cylinder Block
1997 Eagle Vision V6-201 3.3L VIN T SFISECTION Cylinder Block
CYLINDER BLOCK
Cylinder Bore (Standard) 92.993 - 93.007 mm
(3.661 - 3.6617 in.)
Cylinder Bore Out-of-Round
(Maximum Allowable Before Reconditioning) 0.076 mm
(0.003 inch)
Cylinder Bore Taper
(Maximum Allowable Before Reconditioning) 0.051 mm
(0.002 inch)
Reconditioning Working Limits
(For Taper and Out-of-Round) 0.001 inch
Tappet Bore Diameter 0.9051 inch - 0.9059 inch
Cylinder Bore (Standard) 92.993 - 93.007 mm
(3.661 - 3.6617 in.)
Cylinder Bore Out-of-Round
(Maximum Allowable Before Reconditioning) 0.076 mm
(0.003 inch)
Cylinder Bore Taper
(Maximum Allowable Before Reconditioning) 0.051 mm
(0.002 inch)
Reconditioning Working Limits
(For Taper and Out-of-Round) 0.001 inch
Tappet Bore Diameter 0.9051 inch - 0.9059 inch
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.