Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1997VISION V6-201 3.3L VIN T SFIREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSHEATING AND AIR CONDITIONINGCOMPRESSOR HVAC
1997 Eagle Vision V6-201 3.3L VIN T SFI
Compressor HVAC
1997 Eagle Vision V6-201 3.3L VIN T SFISECTION Compressor HVAC
Compressor 10PA17-R-134a [01][02]
Evaporator Oil Charge 2.0 oz.
Condenser Oil Charge 1.0 oz.
Receiver-Dryer Oil Charge 2.0 oz.
Lines Oil Charge 1.5 oz.
[01] -- When components of an A/C system utilizing R-134a refrigerant are replaced, use only ND8 PSG compressor oil No. 82300101, or equivalent.
[02] -- The 10PA17-R12 compressor looks the same and has the same bolt pattern as the 10PA17-R134a compressor. Ensure Proper compressor is used when replacement is necessary.
Evaporator Oil Charge 2.0 oz.
Condenser Oil Charge 1.0 oz.
Receiver-Dryer Oil Charge 2.0 oz.
Lines Oil Charge 1.5 oz.
[01] -- When components of an A/C system utilizing R-134a refrigerant are replaced, use only ND8 PSG compressor oil No. 82300101, or equivalent.
[02] -- The 10PA17-R12 compressor looks the same and has the same bolt pattern as the 10PA17-R134a compressor. Ensure Proper compressor is used when replacement is necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.