Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1997VISION V6-201 3.3L VIN T SFIREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULEDESCRIPTION AND OPERATIONCLIMATE CONTROL SYSTEMSA/C SWITCH STATUS/EVAPORATOR TEMPERATURE STATUS
1997 Eagle Vision V6-201 3.3L VIN T SFI
A/C Switch Status/Evaporator Temperature Status
1997 Eagle Vision V6-201 3.3L VIN T SFISECTION A/C Switch Status/Evaporator Temperature Status
When the ignition is in the RUN position, the Body Control Module (BCM) monitors the evaporator temperature and the status of the A/C switch (manual A/C only) or the current status of the ATC system. Based on this information, the BCM sends a CCD message to the powertrain control module (PCM) indicating the A/C switch status and the evaporator temperature status.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.