Ecu 18-Pin Connector

1992 Eagle Talon TSi, FWD, StandardSECTION Ecu 18-Pin Connector
ECU 18-PIN CONNECTOR PIN IDENTIFICATION (1)

Terminal Wire Color Function
51 Yellow/Dark Blue Injector No. 1 Control
52 Yellow/Black Injector No. 2 Control
53 (2) Brown/White EGR Solenoid Control (Calif.)
54 Yellow Power Transistor Control
55 Yellow/Red Power Transistor Control
56 White/Red MPI Control Relay Fuel Control
57 White Fuel Pressure Control Solenoid
58 Dark Blue Idle Speed Control
59 Yellow Idle Speed Control
60 Light Green Injector No. 3 Control
61 Light Green/White Injector No. 4 Control
62 Black/White Purge Solenoid Control
63 Black/Dark Blue MPI Control Relay Power Control
64 Red/Dark Green CHECK ENGINE Light
65 Red/Black A/C Clutch Relay Control
66 Black/Dark Blue MPI Control Relay Power Control
67 White Idle Speed Control
68 Black Idle Speed Control
(1) See Fig 1 for connector identification.
(2) Wire color may also be Black/Yellow.
Fig 1: ECU 18-Pin Connector
G92I03583Courtesy of CHRYSLER MOTORS.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.