Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1992TALON TSI, FWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONFRONT SUSPENSIONSUSPENSION - FRONTREMOVAL & INSTALLATIONSTRUT ASSEMBLYREASSEMBLY
1992 Eagle Talon TSi, FWD, Standard
Strut Assembly: Reassembly
1992 Eagle Talon TSi, FWD, StandardSECTION Reassembly
- To reassemble, reverse disassembly procedure. Ensure bump rubber engages in groove of dust cover during installation. Install upper spring seat so flat side of strut rod hole engages with flat side of strut rod.
- Align holes of upper spring seat with holes of lower spring seat. This can be done by installing a .4" x 11.8" (10 x 300 mm) pipe through hole of both spring seats.
- Ensure coil spring is aligned with grooves in upper and lower spring seats. Compress coil spring and tighten self-locking nut to specification. Apply multipurpose grease to bearing area of strut, strut insulator and dust cap.
CAUTION:
When applying grease to components, ensure grease DOES NOT contact rubber part of upper strut insulator.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.