Compression Specifications - 4-Cylinder

1992 Eagle Talon TSi, FWD, StandardSECTION Compression Specifications - 4-Cylinder
COMPRESSION SPECIFICATIONS - 4-CYLINDER

Application Specification
Compression Ratio
1.8L PFI 9.0:1
2.0L PFI 9.0:1
2.0L PFI Turbo 7.8:1
2.2L TBI 9.5:1
2.2L PFI Turbo 8.1:1
2.5L TBI 8.9:1
2.5L PFI Turbo 7.8:1
Minimum Compression Pressure
1.8L (1) 131 psi (9.2 kg/cm2 )
2.0L PFI (1) 145 psi (10.2 kg/cm2 )
2.0L PFI Turbo (1) 121 psi (8.5 kg/cm2 )
2.2L & 2.5L (2) 100 psi (7.0 kg/cm2 )
(1) Maximum difference between each cylinder should not exceed 14 psi (.98 kg/cm2 ).
(2) Maximum difference between each cylinder should not exceed 25 percent.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.