Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1992TALON AWD L4-1997CC 2.0L DOHC TURBOREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSEMISSION CONTROL SYSTEMSSYSTEM SPECIFICATIONS
1992 Eagle Talon AWD L4-1997cc 2.0L DOHC Turbo
System Specifications
1992 Eagle Talon AWD L4-1997cc 2.0L DOHC TurboSECTION System Specifications
Firing Order 1-3-4-2
Idle Mixture Not adjustable
Idle Speed [1]
M/T 750 ± 100 RPM
A/T 750 ± 100 RPM
Coolant Temperature Switch
Torque value 22 - 29 ft.lbs. (30 - 40 Nm)
EGR Temperature Sensor
Torque value 7.3 - 8.6 ft.lbs. (10 - 12 Nm)
Engine Coolant Temperature Sensor
Torque value 15 - 29 ft.lbs. (20 - 40 Nm)
ISC Servo Mounting Screws
Torque value 1.8 - 3.3 ft.lbs. (2.5 - 4.5 Nm)
Oxygen Sensor
Torque value 30 - 36 ft.lbs. (40 - 50 Nm)
TPS Mounting Screws
Torque value 1.1 - 1.8 ft.lbs. (1.5 - 2.5 Nm)
[1] Refer to ADJUSTMENT PROCEDURES.
Idle Mixture Not adjustable
Idle Speed [1]
M/T 750 ± 100 RPM
A/T 750 ± 100 RPM
Coolant Temperature Switch
Torque value 22 - 29 ft.lbs. (30 - 40 Nm)
EGR Temperature Sensor
Torque value 7.3 - 8.6 ft.lbs. (10 - 12 Nm)
Engine Coolant Temperature Sensor
Torque value 15 - 29 ft.lbs. (20 - 40 Nm)
ISC Servo Mounting Screws
Torque value 1.8 - 3.3 ft.lbs. (2.5 - 4.5 Nm)
Oxygen Sensor
Torque value 30 - 36 ft.lbs. (40 - 50 Nm)
TPS Mounting Screws
Torque value 1.1 - 1.8 ft.lbs. (1.5 - 2.5 Nm)
[1] Refer to ADJUSTMENT PROCEDURES.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.