Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1982 Eagle Eagle L4-151 2.5LFACTORY OEM SERVICE PROCEDURE
System Specifications
TYPE .SF
CAPACITY, Refill:
4-cyl. 2.3 Liters 2.5 Quarts
6-cyl. 3.8 Liters 4.0 Quarts
Capacity shown is without filter. When replacing filter, additional oil may be needed
Above 40°F(4°C) 20W-40, 20W-50
Above 0°F(-18°C) .10W-30, 10W-40
Below 60°F(16°C) 5W-30
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.