Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2024PROMASTER 3500 BASE, CUTAWAYREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 72 (MOTOR CONTROL PROCESSOR MODULE (MCPA) - DTCS P0C17-00 TO P1CDE-00)
2024 Dodge and Ram ProMaster 3500 Base, Cutaway
Section 72 (Motor Control Processor Module (MCPA) - DTCS P0C17-00 To P1CDE-00)
2024 Dodge and Ram ProMaster 3500 Base, CutawaySECTION Section 72 (Motor Control Processor Module (MCPA) - DTCS P0C17-00 To P1CDE-00)
WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.
- DTC Troubleshooting
- P0C17-00 Drive Motor A Position Sensor 1 Not Learned
- P0C19-00 Drive Motor A Torque Delivered Performance
- P0EED-00 Hybrid/EV Battery System Discharge Circuit Performance
- P0EED-61 Hybrid-EV Battery System Discharge Circuit Performance-Signal Calculation Failure
- P1625-00 Park Pawl System Failure
- P1626-00 Park Pawl Motor Stuck
- P1A4F-00 MCPA Not Programmed
- P1ADE-00 MCPA System Voltage Low
- P1ADF-00 MCPA System Voltage High
- P1AE8-00 MCPA High Voltage Battery Voltage Sensor Circuit Low
- P1AE9-00 MCPA High Voltage Battery Voltage Sensor Circuit High
- P1AEC-00 MCPA HV Battery Voltage Sensor Circuit Performance
- P1AEE-00 MCPA HV Battery System Voltage High
- P1AFC-00 MCPA Lost Communication With HCP
- P1B03-00 Resolver Signal / MCPA Rationality
- P1B03-61 Resolver Signal / MCPA Rationality-Signal Calculation Failure
- P1B07-00 MCPA High Voltage Battery System Voltage Low
- P1B0F-00 Drive Motor A Position Sensor Offset Incorrect
- P1B0F-61 Drive Motor A Position Sensor Offset Incorrect-Signal Calculation Failure
- P1C6D-00 Motor A Invalid Torque/Speed
- P1C8D-11 Power Supply 1 Circuit/Open-Circuit Short To Ground
- P1C8D-12 Power Supply 1 Circuit/Open-Circuit Short To Battery
- P1C8E-00 Power Supply 1 Circuit Low
- P1C8F-00 Power Supply 1 Circuit High
- P1C90-11 Power Supply 2 Circuit/Open-Circuit Short To Ground
- P1C90-12 Power Supply 2 Circuit/Open-Circuit Short To Battery
- P1CDD-00 Hybrid/EV WAKEUP Control 2 Output Circuit/ Open
- P1CDE-00 Hybrid/EV WAKEUP Control 2 Output Circuit Short To Battery
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.