When Monitored

2024 Dodge and Ram ProMaster 3500 Base, CutawaySECTION When Monitored
WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

  • System voltage is with in a calibrated limit.
  • Diagnostic monitor is enabled.
  • Temperature rise for inlet temperature is below calibrated value with respect to charging level and time
  • Vehicle speed is greater than calibrated speed for calibrated amount of time.
  • Vehicle speed is below calibrated speed and vehicle sleep time is more than calibrated value.
  • P0071, P0072, P0073, P00DA, P00DB, P00DC, P0D9C, U1008, or U112A DTCs are not set.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.