Enabling/Set Conditions And Possible Causes - Electric Vehicle Control Unit (EVCU) Internal Fault

2024 Dodge and Ram ProMaster 3500 Base, CutawaySECTION Enabling/Set Conditions And Possible Causes - Electric Vehicle Control Unit (EVCU) Internal Fault
WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.

EVCU INTERNAL FAULT ENABLING CONDITIONS AND FAULT CRITERIA:Β 

DTCS MONITORING CONDITIONS FAULT SETTING CRITERIA POSSIBLE CAUSES
EVCU internal faults (P0601, P0603, P0604, P0605, P060B, P060C, P062F, P16F3, P16F5 & P16F9)Β  .
  • Battery voltage above 10.9 volts with the key on.
The EVCU detects that there is an internal fault.
  • Electric Vehicle Control Unit EVCU.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.