When Monitored

2024 Dodge and Ram ProMaster 3500 Base, CutawaySECTION When Monitored
WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

  • Diagnostic monitor enabled.
  • Min Limit Check:
    • The min limit check is disabled when the vehicle is accelerating above a calibrated RPM in Drive and in Low Gear.
    • The min limit check is disabled in uphill/down hill conditions when output speed and PRND may contradict each other.
    • The max limit check is disabled when the vehicle is accelerating lower than a calibrated RPM in Reverse.
    • The opposite vehicle movement check diagnostic is enabled when Vehicle speed is less than a calibrated RPM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.