Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2024DURANGO SXT PLUS, RWDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (1 OF 2)MODULE, ADAPTIVE CRUISE CONTROL (ACC)
2024 Dodge and Ram Durango SXT Plus, RWD
Module, Adaptive Cruise Control (Acc)
2024 Dodge and Ram Durango SXT Plus, RWDSECTION Module, Adaptive Cruise Control (Acc)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B222F-00 | FLASH WRITE PERFORMANCE |
| C0063-9A | YAW RATE SENSOR - COMPONENT OR SYSTEM OPERATING CONDITIONS |
| C008E-00 | ECU INTERNAL PERFORMANCE |
| C1240-00 | STEERING ANGLE SENSOR ANGLE OVERTRAVEL PERFORMANCE |
| C127A-00 | ESP DID NOT RESPOND TO DECELERATION REQUEST |
| C14A3-00 | XBW RULE VIOLATION |
| C14A4-00 | SENSOR ADJUSTMENT REQUIRED |
| C14A5-00 | SENSOR BLINDED |
| C14A6-92 | VEHICLE REACTION - PERFORMANCE OR INCORRECT OPERATION |
| C15D8-00 | MISMATCH TIRE SIZE |
| C15DC-2A | FORWARD COLLISION WARNING CONTROL SWITCH - STUCK |
| C2129-16 | BATTERY VOLTAGE - CIRCUIT VOLTAGE BELOW THRESHOLD |
| C2129-17 | BATTERY VOLTAGE - CIRCUIT VOLTAGE ABOVE THRESHOLD |
| C212A-84 | SYSTEM VOLTAGE - SIGNAL BELOW ALLOWABLE RANGE |
| C212A-85 | SYSTEM VOLTAGE - SIGNAL ABOVE ALLOWABLE RANGE |
| C2206-00 | VEHICLE CONFIGURATION MISMATCH |
| C2210-00 | ECU OVERTEMPERATURE |
| C2212-00 | ECU IN - PLANT MODE ACTIVE |
| C2223-00 | ECU CONFIGURATION MISMATCH |
| C2225-00 | PCM DISABLED ECU |
| C2226-00 | TCM DISABLED ECU |
| C2227-00 | ABS DISABLED ECU |
| C2318-76 | FRONT CAMERA - WRONG MOUNTING POSITION |
| P0585-00 | SPEED CONTROL SWITCH 1/2 CORRELATION |
| P1593-2A | SPEED CONTROL SWITCH 1/2 STUCK |
| P1666-00 | CRUISE CONTROL MODULE INTERNAL |
| U0002-00 | CAN C BUS OFF PERFORMANCE |
| U0009-00 | HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) |
| U0100-00 | LOST COMMUNICATION WITH ECM/PCM |
| U0101-00 | LOST COMMUNICATION WITH TCM |
| U0102-00 | LOST COMMUNICATION WITH TRANSFER CASE CONTROL MODULE/AWD |
| U0121-00 | LOST COMMUNICATION WITH ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL MODULE "A" |
| U0131-87 | LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE "A" - MISSING MESSAGE |
| U0132-00 | LOST COMMUNICATION WITH SUSPENSION CONTROL MODULE |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0151-00 | LOST COMMUNICATION WITH OCCUPANT RESTRAINT CONTROLLER (ORC) |
| U0155-00 | LOST COMMUNICATION WITH CLUSTER/CCN |
| U0293-00 | LOST COMMUNICATION WITH HYBRID CONTROL MODULE |
| U0401-00 | IMPLAUSIBLE DATA RECEIVED FROM ECM/PCM |
| U0402-00 | IMPLAUSIBLE DATA RECEIVED FROM TCM |
| U0403-00 | IMPLAUSIBLE DATA RECEIVED FROM T-CASE |
| U0415-00 | INVALID DATA RECEIVED FROM ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL MODULE A |
| U0420-29 | INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE "A" - SIGNAL INVALID |
| U0421-00 | IMPLAUSIBLE DATA RECEIVED FROM SUSPENSION CONTROL MODULE |
| U0422-00 | IMPLAUSIBLE DATA RECEIVED FROM BODY CONTROL MODULE |
| U0423-00 | IMPLAUSIBLE DATA RECEIVED FROM CLUSTER/CCN |
| U0429-00 | IMPLAUSIBLE DATA RECEIVED FROM STEERING COLUMN CONTROL MODULE |
| U0452-00 | IMPLAUSIBLE DATA RECEIVED FROM RESTRAINTS CONTROL MODULE |
| U0594-00 | IMPLAUSIBLE DATA RECEIVED FROM HCP |
| U1015-00 | INTERNAL CAN A COMMUNICATION BUS OFF |
| U110A-00 | LOST COMMUNICATION WITH SCM - CAN C |
| U1195-00 | LOST COMMUNICATION WITH STEERING WHEEL SENSOR MODULE |
| U11F9-00 | ENGINE DID NOT RESPOND TO ACC TORQUE REQUEST |
| U1215-00 | LOST COMMUNICATION WITH FORWARD FACING CAMERA |
| U121E-00 | LOST COMMUNICATION WITH STEERING WHEEL CRUISE CONTROL SWITCH |
| U141E-00 | IMPLAUSIBLE DATA RECEIVED FROM CRUISE CONTROL SWITCH |
| U148D-00 | IMPLAUSIBLE DATA RECEIVED FROM FORWARD FACING CAMERA |
| U1600-00 | ECU APPLICATION SOFTWARE MISMATCH |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.