Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2024DURANGO SRT HELLCAT PLUSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 7 (5.7L FUEL SYSTEM)FUEL INJECTION, GASINJECTOR(S), FUELREMOVAL5.7L/6.4L
2024 Dodge and Ram Durango SRT Hellcat Plus
Injector(S), Fuel: Removal: 5.7L/6.4L
2024 Dodge and Ram Durango SRT Hellcat PlusSECTION 5.7L/6.4L
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel rail assembly. Refer to: RAIL, FUEL, REMOVAL
.
1 - PLIERS 2 - INJECTOR CLIP 3 - FUEL INJECTOR - TYPICAL 4 - FUEL RAIL - TYPICAL - Using suitable pliers (1), remove the fuel injector retaining clip (2).
- Remove the fuel injector (3) from the fuel rail (4) using a side to side motion while pulling the injector out of the fuel rail assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.