Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2024DURANGO SRT HELLCAT PLUSREPAIR AND DIAGNOSISENGINE PERFORMANCETUNE-UPIGNITION SYSTEM (SERVICE INFORMATION)TECHNICAL SPECIFICATIONSIGNITION COIL RESISTANCE
2024 Dodge and Ram Durango SRT Hellcat Plus
Ignition Coil Resistance
2024 Dodge and Ram Durango SRT Hellcat PlusSECTION Ignition Coil Resistance
| Engine | Primary Resistance 21°C - 27°C (70°F - 80°F) |
Secondary Resistance 21°C - 27°C (70°F - 80°F) |
|---|---|---|
| 3.6L | 0.6 to 0.9 ohms | 6.0K to 9.0K ohms |
| 5.7L | 0.540 to 0.660 ohms | * 9.24K to 11.76K ohms |
| 6.2L | 0.540 to 0.660 ohms | * 9.24K to 11.76K ohms |
| 6.4L | 0.540 to 0.660 ohms | * 9.24K to 11.76K ohms |
| * Not directly measurable due to diode in circuit. | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.