Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2024DURANGO SRT HELLCAT PLUSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADAS(FORWARD FACING CAMERA MODULE (FFCM) - ELECTRICAL DIAGNOSTICS)STANDARD PROCEDUREFORWARD FACING CAMERA VERIFICATION TEST
2024 Dodge and Ram Durango SRT Hellcat Plus
Forward Facing Camera Verification Test
2024 Dodge and Ram Durango SRT Hellcat PlusSECTION Forward Facing Camera Verification Test
- Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
- With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
- Make sure that all accessories are turned off and that the battery is fully charged.
- If the FFCM was replaced or moved in any way, the FFCM must be aligned. Perform the Forward Facing Camera Calibration Procedure in accordance with the Service Information. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .
- With the scan tool, read FFCM DTCs.
Are any DTCs present in the FFCM?
Yes
- Perform the appropriate diagnostic procedure. Refer to DTC TROUBLESHOOTING .
No
- Repair is complete.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.