Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2024DURANGO SRT HELLCAT PLUSREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASPARK ASSIST MODULE (PAM) (PTS/PAM) - DTCS B1293-92 TO B21DD-17
2024 Dodge and Ram Durango SRT Hellcat Plus
Park Assist Module (PAM) (PTS/PAM) - DTCS B1293-92 To B21DD-17
2024 Dodge and Ram Durango SRT Hellcat PlusSECTION Park Assist Module (PAM) (PTS/PAM) - DTCS B1293-92 To B21DD-17
- DTC Troubleshooting
- B1293-92 PTS-Sensor-6-Performance Or Incorrect Operation
- B1295-11 PTS-Sensor-8-Circuit Short To Ground
- B1295-12 PTS-Sensor-8-Circuit Short To Battery
- B1295-25 PTS-Sensor-8-Signal Shape / Waveform Failure
- B1295-92 PTS-Sensor-8-Performance Or Incorrect Operation
- B1296-11 PTS-Sensor-9-Circuit Short To Ground
- B1296-12 PTS-Sensor-9-Circuit Short To Battery
- B1296-25 PTS-Sensor-9-Signal Shape / Waveform Failure
- B1296-92 PTS-Sensor-9-Performance Or Incorrect Operation
- B1297-11 PTS-Sensor-10-Circuit Short To Ground
- B1297-12 PTS-Sensor-10-Circuit Short To Battery
- B1297-25 PTS-Sensor-10-Signal Shape / Waveform Failure
- B1297-92 PTS-Sensor-10-Performance Or Incorrect Operation
- B1298-11 PTS-Sensor-11-Circuit Short To Ground
- B1298-12 PTS-Sensor-11-Circuit Short To Battery
- B1298-25 PTS-Sensor-11-Signal Shape / Waveform Failure
- B1298-92 PTS-Sensor-11-Performance Or Incorrect Operation
- B12B2-2A Parallel Perpendicular Park Assist Switch-Stuck
- B210C-16 Battery Voltage Input - Circuit Voltage Below Threshold
- B210C-17 Battery Voltage Input - Circuit Voltage Above Threshold
- B2128-16 Sensor Supply Voltage - Circuit Voltage Below Threshold
- B2128-17 Sensor Supply Voltage - Circuit Voltage Above Threshold
- B21DD-16 System Voltage - Circuit Voltage Below Threshold
- B21DD-17 System Voltage - Circuit Voltage Above Threshold
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.