Torque Specifications - Fuel System

2024 Dodge and Ram 1500 TRXSECTION Torque Specifications - Fuel System
WARNING: This page is about a different variant/trim than selected.
GC0220086Courtesy of CHRYSLER GROUP, LLC
FUEL SYSTEM (1 OF 2)

CALLOUT DESCRIPTION SPECIFICATION COMMENTS
1 Fuel Pump Module to Bracket    
2 Fuel Pump Module Bracket to Frame 9 N.m (80 In. Lbs.)   
3 Fuel Tank Strap to Frame Nuts 48 N.m (35 Ft. Lbs.)  -
4 Fuel Filler Pipe to Filler Hose Clamps 3 N.m (30 In. Lbs.)  -
- Fuel Filler Neck to Body Bolt 9 N.m (80 In. Lbs.)   
GC0220075Courtesy of CHRYSLER GROUP, LLC
FUEL SYSTEM (2 OF 2)

CALLOUT DESCRIPTION SPECIFICATION COMMENTS
1 Fuel Rail to Intake Bolts 5 N.m (44 In. Lbs.)  -
2 Accelerator Pedal to Bracket Bolt 5 N.m (44 In. Lbs.)  -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.