Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications - Engine Mounts
2024 Dodge and Ram 1500 TRXSECTION Torque Specifications - Engine Mounts
WARNING: This page is about a different variant/trim than selected.
ENGINE MOUNT - LEFT 4x2
ENGINE MOUNT - LEFT 4x2
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Engine Bracket To Block | 64 N.m (47 Ft. Lbs.) | - |
| 2 | Heat Shield to Engine Mount Nut | 55 N.m (41 Ft. Lbs.) | - |
| 3 | Engine Front Support Insulator To Frame | 64 N.m (47 Ft. Lbs.) | - |
ENGINE MOUNT - RIGHT 4x2
ENGINE MOUNT - RIGHT 4x2
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Engine Bracket To Block | 64 N.m (47 Ft. Lbs.) | - |
| 2 | Heat Shield to Engine Mount Nut | 55 N.m (41 Ft. Lbs.) | - |
| 3 | Engine Front Support Insulator To Frame | 64 N.m (47 Ft. Lbs.) | - |
| - | Engine Mount to Block Stud Bolt | 64 N.m (47 Ft. Lbs.) | - |
ENGINE MOUNT - LEFT 4x4
ENGINE MOUNT - LEFT 4x4
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Engine Mount To Engine Mount Bracket | 80 N.m (59 Ft. Lbs.) | - |
| 2 | Engine Bracket To Block | 63 N.m (46 Ft. Lbs.) | - |
| 3 | Heat Shield To Engine Mount | 55 N.m (41 Ft. Lbs.) | - |
| 4 | Trans Mount Bracket To Trans | 64 N.m (47 Ft. Lbs.) | - |
| 5 | Pinion Nose Bracket To Trans | 64 N.m (47 Ft. Lbs.) | - |
| 6 | Engine Front Support To Axle | 110 N.m (81 Ft. Lbs.) | - |
| 7 | Engine Mount To Frame | 119 N.m (81 Ft. Lbs.) | - |
| 8 | Engine Bracket To Block Bolt | 63 N.m (46 Ft. Lbs.) | - |
ENGINE MOUNT - RIGHT 4x4
ENGINE MOUNT - RIGHT 4x4
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Engine Bracket To Block | 63 N.m (46 Ft. Lbs.) | - |
| 2 | Engine Mount To Engine Mount Bracket Rh | 63 N.m (46 Ft. Lbs.) | - |
| 3 | Engine Mount To Frame | 119 N.m (81 Ft. Lbs.) | - |
| 4 | Engine Mount to Front Axle Bolts | 110 N.m (81 Ft. Lbs.) | - |
| 5 | Heat Shield to Engine Mount Nut | 55 N.m (41 Ft. Lbs.) | - |
| 6 | Engine Mount To Engine Mount Bracket | 80 N.m (59 Ft. Lbs.) | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.