SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM20241500 TRXREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 5 (5.7L ENGINE (SERVICE INFORMATION) - 1500 (1 OF 3))TECHNICAL SPECIFICATIONSTORQUE SPECIFICATIONSTORQUE SPECIFICATIONS - ENGINE BLOCK
2024 Dodge and Ram 1500 TRX

Torque Specifications - Engine Block

2024 Dodge and Ram 1500 TRXSECTION Torque Specifications - Engine Block
WARNING: This page is about a different variant/trim than selected.
GC0204568Courtesy of CHRYSLER GROUP, LLC
ENGINE BLOCK (1 OF 2)

CALLOUT DESCRIPTION SPECIFICATION COMMENTS
1 and 4 Main Bearing Cap to Cylinder Block Bolts Torque Procedure 
  1. Tighten bolts to 13 N.m (10 Ft. Lbs.) 
  2. Tighten bolts to 28 N.m (21 Ft. Lbs.) 
  3. Rotate an additional 90° 
 Tightening Sequence
GC0205257Courtesy of CHRYSLER GROUP, LLC
2 Connecting Rod Cap to Connecting Rod Bolts Torque Procedure 
  1. Tighten bolts to 20 N.m (15 Ft. Lbs.) 
  2. Rotate an additional 90° 
 -
3 Main Bearing Cap to Cylinder Block Bolts
NOTE: The main cap to cylinder block bolts are torqued after final torque of the main cap bolts.
 Torque Procedure 
  1. Tighten bolts to 31 N.m (23 Ft. Lbs.) 
  2. Repeat cross-bolt tightening 
 Tightening Sequence
GC0204155Courtesy of CHRYSLER GROUP, LLC
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.