Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications - Cooling System
2024 Dodge and Ram 1500 TRXSECTION Torque Specifications - Cooling System
WARNING: This page is about a different variant/trim than selected.
COOLING SYSTEM (1 OF 2)
| 1 | Thermostat Housing to Water Pump Bolts | 25 N.m (18 Ft. Lbs.) | - |
| 2 | Water Pump to Cylinder Block Stud Bolt - Long | 28 N.m (21 Ft. Lbs.) | - |
| 3 | Water Pump to Front Cover Bolts Short | 28 N.m (21 Ft. Lbs.) | - |
| 4 | Water Pump to Cylinder Block Bolts Long | 28 N.m (21 Ft. Lbs.) | - |
| 5 | Water Pump to Front Cover Stud Bolt - Short | 28 N.m (21 Ft. Lbs.) | - |
| - | Engine Block Heater to Cylinder Block Bolt | 9 N.m (80 In. Lbs.) | - |
| - | Engine Oil Cooler Tube to Water Pump Nut | 13 N.m (10 Ft. Lbs.) | - |
COOLING SYSTEM (2 OF 2)
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Coolant Bottle Nuts | Securely Tighten | - |
| 2 | Radiator Bolts | 9 N.m (80 In. Lbs.) | - |
| 3 | Electric Fan to Radiator Bolts | 11 N.m (8 Ft. Lbs.) | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.