Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM20241500 TRXREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 272 ((OCCUPANT CLASSIFICATION MODULE (OCM) - ELECTRICAL DIAGNOSTICS - 1500))DTC TROUBLESHOOTINGB2212-00-OCCUPANT CLASSIFICATION MODULE INTERNALDIAGNOSTIC TEST
2024 Dodge and Ram 1500 TRX
Diagnostic Test
2024 Dodge and Ram 1500 TRXSECTION Diagnostic Test
WARNING: This page is about a different car, the 2023 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Replace the Occupant Classification Module (OCM)
- Make sure the battery is fully charged.
- Turn the ignition off, wait ten seconds and turn ignition on.
- With the scan tool, read the OCM DTC.
Did the scan tool display active or stored B2212-00-OCCUPANT CLASSIFICATION MODULE INTERNAL DTC?
Yes
- Replace the Occupant Classification Module (OCM) in accordance with Service Information. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION
.
.
- Perform the Occupant Classification Module (OCM) Verification Test. Refer to OCCUPANT CLASSIFICATION MODULE OCM VERIFICATION TEST .
No
- Perform the OCCUPANT CLASSIFICATION MODULE (OCM) Verification Test. Refer to OCCUPANT CLASSIFICATION MODULE OCM VERIFICATION TEST .
- Replace the Occupant Classification Module (OCM) in accordance with Service Information. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION
.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.