Module, Memory: Installation

2024 Dodge and Ram 1500 TRXSECTION Installation
WARNING: This page is about a different car, the 2023 RAM 1500 Classic. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

The Memory Seat Module (MSM) mounting tabs can be damaged during module installation. Use care to properly align tabs to prevent binding that could result in tab breakage.

GC0087522Courtesy of CHRYSLER GROUP, LLC
  1. Place the module (1) into position making sure the mounting tabs are properly aligned with the front bracket.
  2. Push down on the front of the module (1) snapping the tabs into place in the side brackets.
  3. Connect the electrical connectors to the MSM. Four in the front and one in the back.
  4. Connect the battery negative cable.
  5. Using an appropriate scan tool go to the MSM miscellaneous functions and perform the standardization routine.
  6. Verify system and vehicle operation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.