Integrated Trailer Control Module

2024 Dodge and Ram 1500 TRXSECTION Integrated Trailer Control Module
WARNING: This page is about a different car, the 2023 RAM 1500 Classic. However, it is still accessible from the selected car via links, so may be relevant.
GC0202607Courtesy of CHRYSLER GROUP, LLC
  1. Position the ITCM brackets to the ITCM.
  2. Install the Integrated Trailer Control Module (ITCM) bolts (1) and tighten securely.
    GC0202602Courtesy of CHRYSLER GROUP, LLC
  3. Position the ITCM in the instrument panel and connect the ITCM wire harness connectors.
  4. Engage the ITCM brackets to instrument panel beam.
  5. Install the Integrated Trailer Control Module (ITCM) bracket bolts (1) and tighten securely.
  6. Install the radio. Refer to RADIO, INSTALLATION .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.