Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module, Electronic Shift (ESM): Removal
2024 Dodge and Ram 1500 TRXSECTION Removal
WARNING: This page is about a different car, the 2023 RAM 1500 Classic. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- If equipped, remove the center console bezel. Refer to BEZEL, CENTER CONSOLE, REMOVAL
.
- Remove the pocket insert from above the radio (1).
- Remove two screws (1) that secure the bezel above the radio.
- Remove the pocket insert (1) from above the power outlet.
- Remove one screw that secures the bezel.
- Remove the center stack bezel with a trim stick.
- Disconnect all the electrical connectors from the back of the center stack.
- Remove the four screws (1) that secure the electronic shifter to the backside of the bezel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.