Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSDODGE AND RAM20241500 TRXREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 26 (ELECTRONIC CONTROL MODULES (SERVICE INFORMATION) - 1500 CLASSIC)MODULE, DRIVETRAIN CONTROL (DTCM)INSTALLATION

2024 Dodge and Ram 1500 TRX

Module, Drivetrain Control (DTCM): Installation

2024 Dodge and Ram 1500 TRXSECTION Installation

WARNING: This page is about a different car, the 2023 RAM 1500 Classic. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Place the Drive Train Control Module (3) in its location on the mounting plate (4) and firmly snap into place.
Connect the electrical connectors (2).
Install cover back onto the DTCM by snapping into place.
Install carpeting back into its proper location.
Connect the battery negative cable.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.