Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electronic Stability Program (Esp) Switch
2024 Dodge and Ram 1500 TRXSECTION Electronic Stability Program (Esp) Switch
WARNING: This page is about a different car, the 2023 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
ELECTRONIC STABILITY PROGRAM (ESP) SWITCH
| Refer to COMPONENT INDEX . |
The ESP switch is located in the switch bank pod. When the ESP switch is depressed, the switch bank pod sends a Controller Area Network-Interior High Speed (CAN-IHS) signal to the BCM. The BCM then gates a CAN-C signal to the ABS module.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.