Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM20241500 TRXREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASELECTRONIC CONTROL MODULES (SERVICE INFORMATION) - 1500 (1 OF 2)MODULE, ACTIVE VIBRATION CANCELLATION (AVCM)MODULE PROGRAMMINGAVC PROGRAMMING
2024 Dodge and Ram 1500 TRX
AVC Programming
2024 Dodge and Ram 1500 TRXSECTION AVC Programming
Active Vibration Cancellation (AVC) programming, when required, is performed using the diagnostic scan tool.
- Using the diagnostic scan tool, navigate to the AVC module.
- Select the "Misc. Functions" menu.
- Select the "AVC Transfer Function Learning" routine.
- Follow the on screen prompts.
As seen on the wiTECH introduction page screen, the vehicle must meet the following criteria to perform this routine:
- Ignition is in the RUN position.
- Engine Revolution Per Minutes (RPM) are at zero.
- Vehicle speed is at 0 miles per hour (mph).
- Vehicle is currently on a non-vibrating flat surface.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.