Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM20241500 TRXREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASCENTRAL VISION ADVANCED DRIVER ASSISTANCE SYSTEM MODULE (CVADAS) - DTCS B1285-2A TO B1295-92 - 1500DTC TROUBLESHOOTINGB1285-2A PARK ASSIST/PTS SWITCH-STUCKWHEN MONITORED
2024 Dodge and Ram 1500 TRX
When Monitored
2024 Dodge and Ram 1500 TRXSECTION When Monitored
This diagnostic runs continuously when the following conditions are met:
- Battery voltage is between 9.6 and 16.6 volts.
- System voltage is between 10.0 and 16.0 volts.
- Ignition in the run position and crank delay timer expired.
- DTC U0002-00 is not active.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.