Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 3500 VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESELECTRONIC CONTROL MODULES (SERVICE INFORMATION)MODULE, ANTI-LOCK BRAKE SYSTEM (ABS)INSTALLATION
2023 Dodge and Ram ProMaster 3500 Van Cargo
Module, Anti-Lock Brake System (Abs): Installation
2023 Dodge and Ram ProMaster 3500 Van CargoSECTION Installation
| 1 - ABM |
| 2 - HCU |
| 3 - SOLENOID VALVE STEM |
CAUTION:
Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.
- Align components and install the ABM (1) on the HCU (2).
1 - MOUNTING SCREWS 2 - ABM - Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to the proper specification. Refer to TORQUE SPECIFICATIONS .
- Install the ICU. Refer to INTEGRATED CONTROL UNIT (ICU), INSTALLATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.