Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module, Central Vision Processing (CVPM): Description
DESCRIPTION
The Central Vision Processing Module (CVPM) (1) generates the view in the Surround View Camera (SVC) system display according to inputs received from the four external cameras and driver touch screen inputs via Low Voltage Differential Signal (LVDS) coaxial cables. The CVPM combines the video feeds together and outputs it to the display screen. The CVPM on this model processes four cameras.
The wiring harness connector to the CVPM includes the power and the video feed connections. The CVPM video feed connections are as follows:
- Light Green - Front Camera.
- Brown - Right Mirror Camera.
- Orange - Rear Camera.
- Beige - Left Mirror Camera.
- Violet - to the Radio.
The CVPM is located on the right side of the Instrument Panel, behind and above the glove box assembly area.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.