Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 3500 VAN CARGO EXTENDEDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSCOOLING SYSTEMTECHNICAL SPECIFICATIONSTORQUE SPECIFICATIONS
2023 Dodge and Ram ProMaster 3500 Van Cargo Extended
Torque Specifications
2023 Dodge and Ram ProMaster 3500 Van Cargo ExtendedSECTION Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Belt Tensioner Bolt | 50 | 37 | - |
| Coolant Temperature Sensor | 30 | 22 | - |
| Coolant Crossover Bolts | 11 | 8 | - |
| Engine Block Heater Bolt | 12 | 9 | - |
| Upper Idler Pulley Bolt (Groved Pulley) | 25 | 18 | - |
| Lower Idler Pulley Bolt (Non-Groved Pulley) | 32 | 24 | - |
| Pressurized Coolant Bottle Bolt | 24 | 18 | - |
| Thermostat Housing Bolts | 12 | 9 | - |
| Upper Radiator Hose Nuts | 25 | 18 | - |
| Upper Radiator Mount Bolts | 10 | - | 89 |
| Water Pump M6 Bolts | 11 | 8 | - |
| Water Pump M8 Bolts | 23 | 17 | - |
| Transmission Cooler Lines to Transmission Cooler | 12 | 9 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.